Chanchiyo Holdings Group
Welcome to MCLLROY！
Add to Cart
1. Products Description
If you're looking for a small machine with bigger performances,then MCLLROY wheel loader is made for you with its amazing lifting and dumping height and huge breakout force when it is equipped with buckets,or with pallet forks,guaranteed max productivity.
We use Yunnei engine for this loader. Many developing countries do not currently have strict requirements on engine emissions. Therefore, for export to Southeast Asia, we use Yunnei engines. Yunnei engines are relatively stable in performance and affordable, and can be described as the most cost-effective engine among small loaders.
2. Specification
| MODEL | MCL 926 | |
| ENGINE | Engine Model | Yun Nei 490 |
| RPM | 2400 | |
| Rated Power | 42 kW | |
| Emissions | EU Stage II | |
| WEIGHTS | Operating Weight | 3340 kg |
| Rated Load | 1500 kg | |
| BUCKETS | Bucket Capacities | 0.6-1.0 m³ |
| TRANSMISSION | Max. Travel Speed | 28 km/h |
| Gear Box | Mechanical Transmission(3F+2R) | |
| Axle | Isuzu | |
| Axle Base | 2210 mm | |
| Brake | Disc Brake | |
| HYDRAULIC SYSTEM | Hydraulic Cycle time - lift | ≤ 7 s |
| DIMENSIONS(APPROXIMATE) | Min. Ground Clearance | 340 mm |
| Wheel Base | 1400 mm | |
| Reach at Max.Dump Height | 3200 mm | |
| Dump Reach | ≤ 650 mm | |
| Overall Length - With Bucket | 5340 mm | |
| Overall Width | 1820 mm | |
| Overall Height | 2670 mm | |
| OPERATING SPECIFICATIONS | Tyre Size | 20.5-16 |
| Breakout Force | 32 KN | |
| Joystick | Machanical | |
| Min. turning radius | ≤ 6800 mm | |
| STANDARD EQUIPMENT | Hour meter | Yes |
| Tool Box | Yes | |
| Dual Hight&Low Speed Handle | Yes | |
| OPTIONAL EQUIPMENT | Air Conditioning/heater | |
| Quick Change | ||
| Multifunctional Attachment | ||
| Hydraulic Pilot | ||
3. Details and Advantages
The main components of the loader are used brand-name manufacturer's products, interchangeability of good, reliable, well-resourced parts.
1) Engine:Domestic famous engines ,green/turbocharged/inter-cooled engine.
2) Transmission:Wet multi-plate clutch automatic transmission ,torque converter ,stable performance ,famous brand in China.
3) Axle: Heavy-duty axle ,planetary reduction ,solid and durable ,with the corresponding tires ,for the loader to provide.
4) Hydraulic system:After the rise of force ,high discharge automatic flat working device,short operation time, improve the work efficiency.
4.Production lines:
A complete production process mainly includes: material procurement-steel plate cutting-welding-spray painting -drying-assembly-inspection
Welding:
Manual welding requires experienced workers, and the finished product is more likely to have variation in quality. If the welding robot is well adjusted, the quality will be more stable than manual welding. Our company now uses robot welding, there are currently 10 in total.
Good welding is done at once, so there will not be seam greater than 1mm. And fair welding will have break point. Whereas bad welding makes the seam too wide, they have to stuff iron in the side the seam and weld another layer outside. It is hard to tell from the appearance, but the integrity and strength of the finish product is totally different. You can tell the difference between the welding of our company and other company from the pictures here. (other has break point)
zl930 ZL926
mini wheel loader
front end wheel loader
mini articulated loader
articulated mini wheel loader