Chanchiyo Holdings Group
Welcome to MCLLROY！
Add to Cart
1. Products Description
In general, for construction machinery, the four most important factors are: price, quality, operation, and after-sales.
The amount of shovel material and the stability of the loader depend on the cooperation of the loader frame.
The flexibility and light operation mainly depends on the hydraulic system of the loader.
The low failure rate depends on quality as well as the after-sales service.
MCLLROY wheel Loaders are widely used in the construction, municipal engineering, urban and rural gardens, lime, sand, cement factories, mines and other enterprises and institutions and departments. It is particularity applied to the narrow space for the loading operation of stone,sand and other construction materials.
2. Specification of MCLLROY Wheel Loader
| MSL918D/ZL918D | Metric Units |
| Engine Model | Changfa 490 /Yun Nei 490 |
| RPM | 2400 |
| Rated Power | 42 kW |
| Emissions | EU Stage II |
| Operating Weight | 2500 kg |
| Rated Load | 800-1000 kg |
| Bucket Capacities | 0.5 m³ |
| Max. Travel Speed | 28 km/h |
| Gear Box | CVT 265 torque converter |
| Axle | Small hub |
| Axle Base | 2100 mm |
| Brake | Air Brake |
| Hydraulic Cycle time - lift | ≤ 9 s |
| Min. Ground Clearance | 230 mm |
| Wheel Base | 1650 mm |
| Reach at Max.Dump Height | 2900 mm |
| Dump Reach | 870 mm |
| Overall Length - With Bucket | 4700 mm |
| Overall Width | 1600 mm |
| Overall Height | 2150 mm |
3.Details and advantages of MCLLROY Wheel Loader
The enhanced front and rear frames are proved by 100,000-cycle reliability test.
The lower hinge joint is upgraded from knuckle bearings to tapered roller bearings to prolong the life by 50%.
The wheelbase of the rear frame is extended to enhance the stability and tipping load of the whole machine.
New designed axle with thicker shell.
Oil tube is connected in priority valve in non-rotated form,which prevents the oil tube from cracking in cold circumstances.
The high tenacity engine hood creates a safer and bigger space of maintenance.
Three-layer steel wire tube makes long service life.
Double air filter to prolong the service life of the engine.
All the pin and bush are made of the top steel grades in steel production :Bearing Steel.
4.Delivery of MCLLROY Wheel Loader
The most important thing for delivery is the stability. The climate at sea is unpredictable. If the reinforcement is improper, it will cause damage to the machine during transportation. For example, if the lifting boom is not properly reinforced, it will cause the boom to fall, smash the cab, and smash the glass.
The shipping process for MCLLROY is as follows:
1.Tool box put in the loader.
2.Seat and control panel warp in PVC.
3.Warning lights put in the loader.
4.Drive the loader inside the Container.
5.Stabilize the loader with heavy steel rope.
6.Fasten triangles wood in bottom of tires.
7.Close and seal the door ready for shipment.
CM Issued.