Chanchiyo Holdings Group
Welcome to MCLLROY！
Add to Cart
1. Products Description of MCLLROY Wheel Loader
If you're looking for a small machine with bigger performances,then MCLLROY wheel loader is made for you with its amazing lifting and dumping height and huge breakout force when it is equipped with buckets,or with pallet forks,guaranteed max productivity.
We use Yunnei engine for this loader. Many developing countries do not currently have strict requirements on engine emissions. Therefore, for export to Southeast Asia, we use Yunnei engines. Yunnei engines are relatively stable in performance and affordable, and can be described as the most cost-effective engine among small loaders.
2. Specification of MCLLROY Wheel Loader
| MSL930/ZL930 | Metric Units |
| Engine Model | Changfa 490 /Yun Nei 490 |
| RPM | 2400 |
| Rated Power | 42 kW |
| Emissions | EU Stage II |
| Operating Weight | 3200 kg |
| Rated Load | 2000 kg |
| Bucket Capacities | 1.0 m³ |
| Max. Travel Speed | 35 km/h |
| Gear Box | CVT 265 torque converter |
| Axle | Isuzu |
| Axle Base | 2300 mm |
| Brake | Disc Brake |
| Hydraulic Cycle time - lift | ≤ 7 s |
| Min. Ground Clearance | 260 mm |
| Wheel Base | 1800 mm |
| Reach at Max.Dump Height | 3300 mm |
| Dump Reach | 850 mm |
3.Details and advantages of MCLLROY Wheel Loader
All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multi-function joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.
4.Production lines of MCLLROY Wheel Loader
A complete production process mainly includes: material procurement-steel plate cutting-welding-spray painting -drying-assembly-inspection
Welding:
Manual welding requires experienced workers, and the finished product is more likely to have variation in quality. If the welding robot is well adjusted, the quality will be more stable than manual welding. Our company now uses robot welding, there are currently 10 in total.
Good welding is done at once, so there will not be seam greater than 1mm. And fair welding will have break point. Whereas bad welding makes the seam too wide, they have to stuff iron in the side the seam and weld another layer outside. It is hard to tell from the appearance, but the integrity and strength of the finish product is totally different. You can tell the difference between the welding of our company and other company from the pictures here. (other has break point)
QXM Issued.