Chanchiyo Holdings Group
Welcome to MCLLROY！
Add to Cart
1. Products Description of MCLLROY Wheel Loader
MCLLROY wheel loader is wildly used in construction, agriculture ,garden,etc. And we are experiencing in making high quality efficiency productivity.Strong power and chassis help to muddy road condition,flexible turning is suitable for small space ,excellent unloading height helpful for loading.
For the axle of this loader, we use cast steel small axle housing. There are iron axle and Isuzu axle on the market. The axles play a key role in loader working and walking. Especially under severe working conditions, the internal forces of the axles is large. A good axle allows users to drive safely and work with confidence.
2. Specification of MCLLROY Wheel Loader
| MSL930/ZL930 | Metric Units |
| Engine Model | Changfa 490 /Yun Nei 490 |
| RPM | 2400 |
| Rated Power | 42 kW |
| Emissions | EU Stage II |
| Operating Weight | 3200 kg |
| Rated Load | 2000 kg |
| Bucket Capacities | 1.0 m³ |
| Max. Travel Speed | 35 km/h |
| Gear Box | CVT 265 torque converter |
| Axle | Isuzu |
| Axle Base | 2300 mm |
| Brake | Disc Brake |
| Hydraulic Cycle time - lift | ≤ 7 s |
| Min. Ground Clearance | 260 mm |
| Wheel Base | 1800 mm |
| Reach at Max.Dump Height | 3300 mm |
| Dump Reach | 850 mm |
| Overall Length - With Bucket | 5300 mm |
| Overall Width | 1850 mm |
3.Details and advantages of MCLLROY Wheel Loader
The MCLLROY MSL series wheel loader are compact, yet powerful, delivering high performance .
The turning radius is small and the steering is flexible; suitable for operating in tight spaces.
A 25% increase in lift total cycling time and a 40-45km/h travel speed will allow the operator to be more productive.
While the enhanced structure parts such as bucket link,bell crane,steering pin, tiger head lift arm basement provides the loader to be solid and durable when the loader is working under tough conditions.
4.Production lines of MCLLROY Wheel Loader
A complete production process mainly includes: material procurement-steel plate cutting-welding-spray painting -drying-assembly-inspection
Assembly:
Our factory arrange seven steps for assembly. There are over a thousand parts in a loader. I will talk about assembly of major components.
First, our workers will assemble the front frame, rear frame, swing frame, front axle, rear axle together, and then install air tank, relief valve, air booster pump on the frame.
At this step, the worker should pay attention to the tightness of the screws and adjust the gap: for example, the hinged part is not supposed to move up and down and must be tight (can be shaken left and right); there is also a gap between the swing frame and rear frame, which can be moved up and down, but not back and forth; and Gear oil should be added to the front and rear axles.
QXM Issued.